企业信息

    上海凯贤印刷科技有限公司

  • 12
  • 公司认证: 营业执照已认证
  • 企业性质:有限责任公司
    成立时间:2009
  • 公司地址: 上海市 嘉定区 嘉定镇街道 上海市嘉定区沪宜公路6106号
  • 姓名: 高利华
  • 认证: 手机未认证 身份证未认证 微信未绑定

    高温烤漆表面油墨

  • 所属行业:二手 二手办公用品 记事本
  • 发布日期:2018-06-29
  • 阅读量:169
  • 价格:160.00 元/千克 起
  • 产品规格:1千克
  • 产品数量:10000.00 千克
  • 包装说明:按订单
  • 发货地址:上海嘉定嘉定  
  • 关键词:高温烤漆表面油墨

    高温烤漆表面油墨详细内容

    具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 
    Oles MPE Plating Ink
    MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage.

    http://fhq8888.cn.b2b168.com
    欢迎来到上海凯贤印刷科技有限公司网站, 具体地址是上海市嘉定区嘉定镇街道上海市嘉定区沪宜公路6106号,老板是赵菁。 主要经营PP免处理油墨,PE移印油墨、PET胶油墨。 单位注册资金单位注册资金人民币 100 万元以下。 我司为您提供PP免处理油墨的详细产品价格、产品图片等产品介绍信息,如果您对我公司的产品有兴趣,请在线留言或者来电咨询。